Bomgar PA B200 Hardware Details
The following hardware details reflect the physical and technical specifications of the Bomgar B200. Bomgar makes every effort to maintain a consistent specification to ensure reliability and quality. Note that the specifications herein are subject to change without notice, and may vary slightly from your model.
Hardware Type: 1U rack-mountable server
Dimensions: 1.68 x 19 x 19.5 in.
Weight: Approximately 20 lbs.
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-Operating Temperature: -40°C to 65°C (-40°F to 149°F)
Operating Humidity: 10% to 80% RH (non-condensing)
Non-Operating Humidity: 5% to 95% RH (non-condensing)
Processor: One Intel E3 - 1200 V5 series
Hard drive: 500GB 7.2K RPM SATA 3 Gbps 3.5 in. Cabled Hard Drive ( 400 - ACDG)
NICs: Two 10/100/1000 Mbps
Power supply: single, internal 250W AC
- AC Input Voltage: 100 to 240 V
- Rated Input Current: 4A - 2A
- Rated Operating Frequency: 50 to 60 Hz
- 1039 BTU/hr maximum @ rated output of 250 W PSU
- Measured Power Consumption:
- Idle: 46W
- Load: 80W
|Safety Testing||Emissions Testing||Certification Marks|