Log Into Remote Systems Using Credential Injection from the Access Console

When accessing a Windows-based Jump Item via the access console, you can use credentials from a credential store to log into the endpoint or to run applications as an admin.

Before using credential injection, make sure that you have a credential store or password vault available to connect to Bomgar Privileged Access.

Install and Configure the Endpoint Credential Manager

Before you can begin accessing Jump Items using credential injection, you must download, install, and configure the Bomgar Endpoint Credential Manager (ECM). The Bomgar ECM allows you to quickly configure your connection to a credential store, such as a password vault.

Note: The ECM must be installed on your system to enable the Bomgar ECM Service and to use credential injection in Bomgar Privileged Access.

System Requirements

  • Windows Vista or newer, 64-bit only
  • .NET 4.5 or newer
  1. To begin, download the Bomgar Endpoint Credential Manager (ECM) from Bomgar Support. Start the Bomgar Endpoint Credential Manager Setup Wizard.

    Bomgar ECM EULA

  2. Agree to the EULA terms and conditions. Mark the checkbox if you agree, and click Install.

    Note: You are not allowed to proceed with the installation unless you agree to the EULA.

    If you wish to modify the installation path, click the Options button to customize the installation location.

  3. Click Install.

     

  4. Bomgar ECM Destination Folder

  5. Choose a location for the Credential Manager and click Next.
  6. On the next screen, you can begin the installation or review any previous step.
  7.  

    ECM Installation

  8. Click Install when you are ready to begin.
  9.  

    ECM Installation Complete

  10. The installation will take a few moments. On the screen, click Finish.
  11.  

Note: To ensure optimal up-time, administrators can install up to five ECMs on different Windows machines to communicate with the same site on the Bomgar Appliance. A list of the ECMs connected to the appliance site can be found at /login > Status > Information > ECM Clients.

Note: When multiple ECMs are connected to a Bomgar site, the Bomgar Appliance routes requests to the ECM that has been connected to the appliance the longest.

Note: If you get a Windows plugin error during installation, locate and unblock BomgarVaultRestPlugin.dll.

Configure a Connection to Your Credential Store

Using the ECM Configurator, set up a connection to your credential store.

ECM Configurator exe File

  1. Locate the Bomgar ECM Configurator you just installed using the Windows Search entry field or by viewing your Start menu programs list.
  2. Run the program to begin establishing a connection.
  3.  

    ECM Configurator Interface

  4. When the ECM Configurator opens, complete the fields. All fields are required.
  5.  

    Enter the following values:
    Field Label Value
    Client ID The ID for your credential store.
    Client Secret The secret key for your credential store.
    Site The URL for your credential store instance.
    Port The server port through which the ECM connects to your site.
    Plugin Click the Choose Plugin... button to locate the plugin.

    ECM File List

  6. When you click the Choose Plugin... button, the ECM location folder opens.
  7. Paste your plugin files into the folder.
  8. Open the plugin file to begin loading.

Note: If you are connecting to a password vault, more configuration at the plugin level may be needed. Plugin requirements vary based on the credential store that is being connected.

important

To apply new settings in the configuration, restart the ECM service.

Use Credential Injection to Access Remote Systems

After the credential store has been configured and a connection established, the access console can begin using credentials in the credential store to log into remote systems.

  1. Log into the access console.
  2. Jump to a remote system with a Jump Item installed as an elevated service on a Windows machine.
  3. Click the Play button to begin screen sharing with the remote system. If the remote system is at the Windows login screen, the Inject Credentials button is highlighted.

Inject Credentials Button

  1. Click the Inject Credentials button. A pop-up credential selection dialog appears, listing the credentials available from the ECM.

 

Access Console Credential Selection

  1. Select the appropriate credentials to use from the ECM. The system retrieves the credentials from the ECM and injects them into the Windows login screen.
  2. The representative is logged in to the remote system.

 

Choose from Favorite Credentials for Injection

After you have used a set of credentials to log into an endpoint, the system stores your preferred credentials for the endpoint and the context in which they were used (to log in, to perform a special action, to elevate, or to push) in the appliance database. The next time you use a credential to access the same endpoint, the credential injection menu makes a recommendation for which credentials to use. The credentials are displayed at the top of the credentials list, followed by any remaining credentials. If no credential history exists for an endpoint, the appliance simply displays all possible credentials.

The credential list recommends no more than five credentials.