Check for Updates to Install Bomgar Software

 Updates
Updates :: Check

Bomgar Appliance updates are installed from the /appliance web interface on the Updates page. Each update must be built by Bomgar and is keyed to the serial number of the appliance for which it was built. For this reason, the appliance must be registered in order to check for updates.

  1. Once Bomgar has built an update for your appliance, you will receive a notification email. Go to /appliance > Updates. Retrieve the update using either Updates :: Check > Check for Updates or Updates :: Manual Installation > Appliance Download Key.

    Note: The Check for Updates option can be used only if the appliance has outbound access over TCP port 443 to update.bomgar.com. Manual installation does not require this connection.

Available Updates

  1. Once the check is complete, all available updates matching the serial number of your appliance will be listed in the /appliance web interface. There are two types of updates:
    • Updates for /login licensing (always shown in the format of Bomgar-x.x.x)
    • Updates for /appliance Base Software (always shown in the format of Base Software x.x.x)

    Base Software includes features and fixes for /appliance as well as the prerequisite code required before installing license updates. Therefore, new licensing updates typically require you to install the prerequisite Base Software Update first. In this case, Bomgar's update interface will make note of the correct order in which to install updates. If you are still unsure, take a screenshot of your available updates and send the screenshot to Bomgar Technical Support for assistance.

IMPORTANT!

As a reminder, you must send Bomgar Technical Support the following items before Support can build your Base Software and/or software licensing updates:

  1. DNS hostname (fully qualified domain name) of the appliance
  2. SSL root certificate or self-signed SSL certificate
  3. Screenshot of the /appliance > Status > Basics page
  1. Once you have sent Bomgar Technical Support your hostname, SSL certificate, and screenshot, they will build the necessary updates and send you detailed installation instructions.
  2. When installation is complete, the Bomgar Appliance is ready to be used for remote support. To validate your appliance's readiness, log into the /login interface by going to your appliance's URL followed by /login (e.g., support.example.com/login).

    Default Username: admin

    Default Password: password

  3. Upon initial login, you will be prompted to change your password.
  4. Once the initial login is complete, you can validate your software licensing configuration on the Status > Information page, add user accounts on Users & Security > Users, and download client software from My Account. Because Bomgar Remote Support is licensed by concurrent users, you can set up as many accounts as you need, each with unique usernames and passwords.

For security purposes, the administrative username and password used for the /appliance interface are distinct from those used for the /login interface and must be managed separately. Usernames and passwords for /login are valid for both the /login interface (where users and configuration are managed) and for representative consoles (where remote support sessions are run). The options available in both of these locations are dependent upon the permissions assigned by the /login administrator to each user's account.

For help getting started with the Bomgar client software, see the documentation located at www.bomgar.com/docs. Appliance Guides and Support Administrator Guides explain the various administrative options of your /appliance and /login web interfaces, and Support Rep Guides show you how to use the Bomgar client software.

 

Open Source Software Acknowledgments

For information on open source software copyrights and acknowledgments used in Bomgar hardware and software products, please see the Attributions index at http://www.bomgar.com/docs/content/attributions/index.htm.